Service Plans

Keep your BYD New Energy Vehicle (NEV) in peak condition with our tailored service plans, designed for optimal performance and reliability. Our comprehensive maintenance includes essential services like brake fluid checks, coolant replacements, and timely software updates, ensuring your EV or plug-in hybrid runs smoothly.

Service plans are competitively priced and strategically designed to deliver long-term financial benefits. By securing your plan upfront, you lock in current market rates, ensuring optimal vehicle performance while mitigating the impact of future price increases and inflation. This proactive approach guarantees both reliability and cost efficiency for your investment.

Important Note:

To be eligible for purchase of a post-sale BYD Service Plan, your vehicle must be within the following mileage thresholds:

  • EV: Under 23,000 km
  • PHEV: Under 4,000 km

If your vehicle exceeds these limits, please contact us here and our team will be in touch to discuss servicing options.

Purchase now

Atto 1 & 2 Service Schedule

3 year / 60,000km service plan $928 including GST
6 year / 120,000km service plan $2,334 including GST

Atto 1 & 2

Item 12m/20,000km 24m/40,000km 36m/60,000km 48m/80,000km 60m/100,000km 72m/120,000km
Tighten the chassis fixing screws
Brake pedal and EPB switch
Brake friction block and discs
Brake system pipelines & hoses
Guide pin of brake caliper assembly checkup
Steering wheel and pull rod
Drive shaft boot checkup
Ball pin and boot checkup
Check front and rear suspension
Check tyres and inflation pressure (incl. TPMS)
Front and rear alignment checkup
Tyre rotation (customer responsibility) Check air pressure and tire condition at least once a month and conduct rotation every 10,000km
Door stop checkup (Apply 0.3-0.8g of grease)
Wheel bearings clearance checkup
Check coolant level in expansion tank
Drive motor anti-freeze replacement Replace
Inspect Brake Fluid level
Brake fluid replacement Replace Replace Replace
Checking of vehicle module fault codes, DTC (cleared after recording)
Check & Tighten power battery tray, guard, crash bar and mounting point
Replacement of gear oil in transmission (NT30 transmission) Replace Replace Replace
Check powertrain for fluid leakage & impact
Check High Voltage harness connector for lose or damage
Check High Voltage module appearance, deformation or oil stain checkup and replaced if needed
Check charging connector operation.
Checking of the activated carbon HEPA filter. Replacement at additional cost of $21.85 Replace Replace Replace
Checking of headlights, turning lights and cabin lighting
Check the operation of headlight height adjuster leveler
Check for foreign matter at EPS grounding point
Check EPS connector connection
Checking of the appearance of EPS ECU for corrosion
Checking of the connection between EPS ECU and motor for foreign bodies or corrosion* and replace if needed
Checking of the vehicle module for software update (updated if any)
Check High Voltage components for wading marks
Check the lock nut torque of wiper arm
Checking of hood lock and fasteners

Atto 3 & Dolphin Service Schedule

3 year / 60,000km service plan $928 including GST
6 year / 120,000km service plan $2,334 including GST

Atto 3 & Dolphin

Item 3m/5,000km 12m/20,000km 24m/40,000km 36m/60,000km 48m/80,000km 60m/100,000km 72m/120,000km
Tighten the chassis fixing screws
Brake pedal and EPB switch
Brake friction block and discs
Brake system pipelines & hoses
Guide pin of brake caliper assembly checkup
Steering wheel and pull rod
Drive shaft boot checkup
Ball pin and boot checkup
Check front and rear suspension
Check tyres and inflation pressure (incl. TPMS)
Front and rear alignment checkup
Tyre rotation (customer responsibility) Check air pressure and tire condition at least once a month and conduct rotation every 10,000km
Door stop checkup (Apply 0.3-0.8g of grease)
Wheel bearings clearance checkup
Check coolant level in expansion tank
Drive motor anti-freeze replacement Replace every 4 years / 80,000kms
Inspect Brake Fluid level
Brake fluid replacement Replace every 2 years / 40,000kms
Checking of vehicle module fault codes, DTC (cleared after recording)
Check & Tighten power battery tray, guard, crash bar and mounting point
Capacity testing and calibration Every 72,000km or 6 months (Customer to perform as per owner's manual)
Replacement of gear oil in transmission (NT30 transmission) Replace Replace Replace
Check powertrain for fluid leakage & impact
Check High Voltage harness connector for lose or damage
Check High Voltage module appearance, deformation or oil stain checkup and replaced if needed
Check charging connector operation.
Checking of the activated carbon HEPA filter. Replacement at additional cost of $21.85 Replace Replace Replace Replace Replace Replace
Checking of headlights, turning lights and cabin lighting
Check the operation of headlight height adjuster leveler
Check for foreign matter at EPS grounding point
Check EPS connector connection
Checking of the appearance of EPS ECU for corrosion
Checking of the connection between EPS ECU and motor for foreign bodies or corrosion* and replace if needed
Checking of the vehicle module for software update (updated if any)
Check High Voltage components for wading marks
Check the lock nut torque of wiper arm
Checking of hood lock and fasteners

You can purchase a 3 year 60,000km service plan for $928, you can either do this online here if you have already received your registration number or if you are placing a new order can select this when ordering your new ATTO 3 or Dolphin.

Seal Service Schedule

Dynamic/Premium - 3 Year / 60,000 Km Service plan $1,452 including GST
Performance - 3 Year / 60,000 Km Service plan $1,788 including GST

Dynamic/Premium - 6 Year / 120,000 Km Service plan $3,596 including GST
Performance - 6 Year / 120,000 Km Service plan $4,726 including GST

Seal

Item 3m/5,000km 12m/20,000km 24m/40,000km 36m/60,000km 48m/80,000km 60m/100,000km 72m/120,000km
Check chassis screw tightening
Check brake pedal and EPB switch Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check brake pads and discs
Check brake system pipeline and hoses Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check brake caliper assembly guide pin Inspect 12 months or 20,000 km for the first time, and then check it every 24 months or 40,000 km.
Check steering wheel and steering link Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check drive shaft dust cover Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check ball pin and dust cover Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check front and rear suspension Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check tyres and inflation pressure (incl. TPMS)
Check front and rear wheel alignment
Tyre rotation (check the air pressure and tire condition at least once a month)
Inspection of door check strap
Check wheel bearings Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check the coolant level in the expansion tank
Replace drive motor antifreeze Replace the long-acting organic acid coolant every 4 years or 100,000 km, whichever comes first.
Check brake fluid
Replacement of brake fluid Replace every 2 years / 40,000kms
Check vehicle module DTC (clear after recording)
Check torque of high-voltage battery tray, shield, bumper bar and installation points (QH)
Traction Battery capacity test and calibration Inspect every 80,000 km or 48 months
Check and replace gear oil in the transmission (front drive NT31/rear drive NRT36 transmission) Replace gear oil after 24 months or 40,000 km for the first time, and then replace oil with filter every 24 months or 40,000 km
Check for powertrain leaks or damage
Check for loose high-voltage wiring harness or connectors
Check HV module exterior parts for deformation and oil marks
Check each charging connector interface for any foreign matters or ablation
Check activated carbon high-efficiency pollen filter Inspect every 12 months or 20,000 km (whichever comes first), and replace it if necessary; in areas with severe
Check that bulbs and LEDs are illuminating properly
Check that headlight dimming function is normal
Calibrate the initial downward angle of low beam Calibrate it every 10,000 km
Check the EPS GND point for any foreign matters or ablation
Check the EPS connector for looseness or connector pins for ablation
Check the EPS ECU for corrosion
Check the connection between EPS ECU and motor for foreign matters or corrosion
Check vehicle module for any software updates, and update it (if any)
Check the high-voltage components for signs of coolant leaks.
Check the torque of wiper arm lock nut
Check hood lock and its fasteners Inspect every it every 12 months.

Sealion 5 Service Schedule

3 ½ Year / 60,000 Km Service Plan $2,014 including GST
6 ½ Year / 120,000 Km Service Plan $4,800 including GST

Sealion 5

Item 6m/3,500km 18m/20,000km 30m/40,000km 42m/60,000km 54m/80,000km 66m/100,000km 78m/120,000km
Replace the oil and oil filter R R R R R R R
Spark plug R
Replace the fuel filter R R
Replace the air filter element R R
Check the crankcase ventilation system (PCV valve and ventilation hose)
Check the engine idle speed
Replace the carbon canister dust filter Every 2 years, 30,000km or frequent petrol pump
Check the exhaust pipe connector for air leakage
Check the three-way catalyst for damage
Check the fuel tank cap, fuel lines and connections
Check the active carbon canister
Check and tighten the chassis fixing bolts
Check the brake pedal and electronic parking switch
Check the brake friction pads and brake discs
Check the brake system pipelines and hoses
Check the steering wheel and pull rod
Check the transmission shaft dust cover
Check all ball joints and dust covers
Check front and rear suspension components
Inspect front wheel and rear wheel alignment
Tyre rotation R R R
Check all wheel bearings
Check the bonnet lock, hinges and release mechanism
Check coolant fluid level in the expansion tank
Check the brake fluid level
Check the DTC of vehicle module (clear after recording)
Check the power battery tray and crash bar
Check the powertrain for fluid leakage and damage
Check the high voltage wiring harness and connectors for security
Check the high voltage module for deformation
Check for contamination in the interface of each charging connector
Check the software of each vehicle module is updated
Check the high voltage components for signs of water ingress
Check bonnet bump stops for adjustment and signs of wear
Check operation of all exterior lights, bulb and LEDs lamps
Check front headlight main beam and low beam function
Check for any contamination at the EPS grounding point
Check the security of the EPS connector, check for loose connections pin security
Check the corrosion at EPS ECU
Check for contamination or corrosion at the connection between EPS ECU and drive
Check the pollen filter, Replace every 2 years or 40,000 km R R R
Check the filter screen of PM2.5 quick tester (if any)
Low beam initial dip calibration Perform a calibration every 100,000 km
Replace the engine coolant and electronic control coolant Replace coolant every 4 years or 100,000 km, whichever comes first
Changing Brake Fluid Replace it every 2 years or 40,000km, and check it during routine
Check and replace EHS special gear oil Check EHS special gear oil quantity at each service. Change the EHS

Sealion 6 Service Schedule

Dynamic – 3 ½ Year / 60,000 Km Service Plan $2,054 including GST
Premium - 3 ½ Year / 60,000 Km Service Plan $2,095 including GST

Dynamic – 6 ½ Year / 120,000 Km Service Plan $5,106 including GST
Premium - 6 ½ Year / 120,000 Km Service Plan $5,280 including GST

Sealion 6

Item 6m/3,500km 18m/20,000km 30m/40,000km 42m/60,000km 54m/80,000km 66m/100,000km 78m/120,000km
Replace the oil and oil filter R R R R R R R
Spark plug R
Replace the fuel filter R R
Replace the air filter element R R
Check the crankcase ventilation system (PCV valve and ventilation hose)
Check the engine idle speed
Replace the carbon canister dust filter Every 2 years, 30,000km or frequent petrol pump
Check the exhaust pipe connector for air leakage
Check the three-way catalyst for damage
Check the fuel tank cap, fuel lines and connections
Check the active carbon canister
Check and tighten the chassis fixing bolts
Check the brake pedal and electronic parking switch
Check the brake friction pads and brake discs
Check the brake system pipelines and hoses
Check the steering wheel and pull rod
Check the transmission shaft dust cover
Check all ball joints and dust covers
Check front and rear suspension components
Inspect front wheel and rear wheel alignment
Tyre rotation R R R
Check all wheel bearings
Check the bonnet lock, hinges and release mechanism
Check coolant fluid level in the expansion tank
Check the brake fluid level
Check the DTC of vehicle module (clear after recording)
Check the power battery tray and crash bar
Check the powertrain for fluid leakage and damage
Check the high voltage wiring harness and connectors for security
Check the high voltage module for deformation
Check for contamination in the interface of each charging connector
Check the software of each vehicle module is updated
Check the high voltage components for signs of water ingress
Check bonnet bump stops for adjustment and signs of wear
Check operation of all exterior lights, bulb and LEDs lamps
Check front headlight main beam and low beam function
Check for any contamination at the EPS grounding point
Check the security of the EPS connector, check for loose connections pin security
Check the corrosion at EPS ECU
Check for contamination or corrosion at the connection between EPS ECU and drive
Check the pollen filter, Replace every 2 years or 40,000 km R R R
Check the filter screen of PM2.5 quick tester (if any)
Low beam initial dip calibration Perform a calibration every 100,000 km
Replace the engine coolant and electronic control coolant Replace coolant every 4 years or 100,000 km, whichever comes first
Changing Brake Fluid Replace it every 2 years or 40,000km, and check it during routine
Check and replace EHS special gear oil Check EHS special gear oil quantity at each service. Change the EHS

Sealion 7 Service Schedule

Premium
3 Year / 60,000 Km Service plan $1,370 including GST
6 Year / 120,000 Km Service plan $ 3,564 including GST

Performance
3 Year / 60,000 Km Service plan $1,757 including GST
6 Year / 120,000 Km Service plan $ 4,723 including GST

Sealion 7

Item 12m/20,000km 24m/40,000km 36m/60,000km 48m/80,000km 60m/100,000km 72m/120,000km
Check chassis screw tightening
Check brake pedal and EPB switch Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check brake pads and discs
Check brake system pipeline and hoses Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check brake calliper assembly guide pin Inspect 12 months or 20,000 km for the first time, and then check it every 24 months or 40,000 km.
Check steering wheel and steering link Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check drive shaft dust cover Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check ball pin and dust cover Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check front and rear suspensions Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check tyres and inflation pressures (including TPMS)
Check front and rear wheel alignment
Tyre rotation (check the air pressure and tire condition at least once a month)
Inspection of door check strap
Check wheel bearings Inspect every 24 months or 40,000 km, and every 12 months or 20,000 km under severe working conditions.
Check the coolant level in the expansion tank
Replace drive motor antifreeze Replace the long-acting organic acid coolant every 4 years or 100,000 km, whichever comes first.
Check brake fluid
Replacement of brake fluid Replace every 2 years or 40,000 km
Check vehicle module DTC (clear after recording)
Check torque of high-voltage battery tray, shield, bumper bar and installation points (QH)
Traction Battery capacity test and calibration Inspect every 80,000 km or 48 months
Check and replace gear oil in the transmission (front drive NT31/rear drive NRT36 transmission) Replace gear oil after 24 months or 40,000 km for the first time, and then replace oil with filter every 24 months or 40,000 km
Check for powertrain leaks or damage
Check for loose high-voltage wiring harness or connectors
Check HV module exterior parts for deformation and oil marks
Check each charging connector interface for any foreign matters or ablation
Check activated carbon high-efficiency pollen filter Inspect every 12 months or 20,000 km (whichever comes first) and replace it if necessary; in areas with severe working conditions, check it every 6 months and replace it if necessary.
Check that bulbs and LEDs are illuminating properly
Check that headlight dimming function is normal
Calibrate the initial downward angle of low beam Calibrate it every 10,000 km
Check the EPS GND point for any foreign matters or ablation
Check the EPS connector for looseness or connector pins for ablation
Check the EPS ECU for corrosion
Check the connection between EPS ECU and motor for foreign matters or corrosion
Check vehicle module for any software updates, and update it (if any)
Check the high-voltage components for signs of coolant leaks.
Check the torque of wiper arm lock nut
Check hood lock and its fasteners Inspect every it every 12 months.

Shark 6 Service Schedule

3 ½ / 60,000km service plan $2,080 including GST
6 ½ / 120,000km service plan $5,551 including GST

Shark 6

Item 6m/3,500km 18m/20,000km 30m/40,000km 42m/60,000km 54m/80,000km 66m/100,000km 78m/120,000km
Replace engine oil RRRRRRR
Replace engine oil filter RRRRRRR
Install new oil filter drain plug gasket RRRRRRR
Add screen wash and top up reservior. RRRRRR
Replace engine coolant and drive motor coolant R
Replace brake fluid RRR
Replace ehs gear oil R
Replace ehs filter R
Install new EHS oil drain gasket R
Replace front differential gear oil R
Replace rear motor oil R
Replace rear motor oil drain gasket R
Replace spark plugs R
Replace engine air filter element RRR
Replace dust filter carbon canister RRR
Replace pollen filter RRR
Replace fuel filter RRR
Crankcase ventilation system (PCV valve and ventilation hose)
Engine idle speed
Cooling pipe damage and connecting part
tightness
Brake friction block and brake discs
Chassis screws Check
Brake pedal and EPB switch
Brake piping and hoses
Steering wheel and tie rod
Drive shaft boot
Ball pin and dust boot
Front and rear suspension
Tire wear, rotate when nessasary
Adjust tyre pressures
Wheel bearing clearance
EPS connector and GND point
EPS ECU corrosion
Hood lock and fasteners
Coolant level in expansion tank
Vehicle module DTCs (to be cleared after recording)
High-voltage battery tray, crash bar, shield, crash valve, thermal insulation cotton and mounting torque
Powertrain leaks or bumps
Fasteners such as high-voltage distribution box and DC charging distribution box
Loose high-voltage wiring harnesses or connectors and connector pin ablation
Deformation of or oil stains on the highvoltage module
Foreign materials on or ablation of charging connector interface
Wading marks on high-voltage parts
Vehicle module software update (update if any
Lamps and LED lighting units
Headlight dimming
Lock nut torque of wiper arm
Inspect condition of wiper blades and replace if required.
The fastening of door locks and lock bolts
Electric fan
Loose cooling fan grounding and connectors
Fuse box and domain controller power terminal connection looseness
Damage of connectors inside and outside the hood
Steering shaft lock
Electric horn
Air leakage of exhaust pipe joint
Damage to the three-way catalytic converter
Fuel tank cap, fuel lines and connections
Spare tire jack

FAQ's

I don’t do big mileage do I still have to service every year?

Yes, a number of items are impacted by time as well as mileage, for example brake fluid needs to be replaced every 2 years in most brands of cars on the road and this is always time based not mileage based as over time the brake fluid can get water into it.

Electric Vehicle don’t have moving parts so don’t need servicing

This is a myth we see often, and this is completely incorrect. Your BYD has several filters, drive motor antifreeze, gear oil and brake fluid, etc. that still need replacing. Like an ICE vehicle, every brand has different requirements, but all EV vehicles do require some form of servicing.

Can I use this service plan nationally?

Yes your service plan can be used at any BYD franchised dealer across New Zealand.

Is the service plan transferable?

Unfortunately we are unable to offer transferability of the service plan, if you are likely to replace your vehicle inside 4 years we recommend the 3 year service plan

What are the Terms and Conditions?

Purchase a Service Plan

Your Details

Payment Details

Stripe We accept Visa Mastercard